Issues to be noted in maintaining the processing equipment of organic fertilizer production lines

 The organic fertilizer production line includes disc granulator, drum screening machine, semi wet material grinder, horizontal mixer, organic fertilizer dryer, fermentation compost turning machine, cooler, packaging equipment, etc. These machines are professional equipment for the production of organic fertilizer.

These fertilizer equipments are large in size, not low in price, and can be used for a long time, so we need to maintain these organic fertilizer equipments well at ordinary times. The following is a brief introduction to the six points for attention of organic fertilizer production line equipment maintenance:

1. Prevent the engine from overheating. Long time use should pay attention to timely shutdown, try to choose a cool place, and open the hood for ventilation and heat dissipation.

2. Prevent lubricating oil from oxidation and deterioration. The summer lubricating oil should be replaced in the crankcase and gearbox. The quantity and quality of lubricating oil should be checked frequently and replaced in time.

3. Protect the machine from excessive sun exposure. Whether it is the manufacturing of NPK fertilizer or the production of organic fertilizer, the paint on the fertilizer equipment should be bright and clean to protect the machine from rusting. Long term exposure will change color and wrinkle. Ordinary protection, such as cleaning and waxing, has some effects, but it is difficult to achieve long-term effect.

4. Prevent the mixture from being too rich. In order to reduce the oil supply and prevent the danger caused by too rich gas mixture, the metering hole should be reduced, the connecting position of acceleration device and throttle rocker arm should be adjusted, and the oil level should be reduced appropriately.

5. Preventing air resistance. To prevent air resistance, the gasoline pump can be wrapped with a damp cloth to cool down.

6. Prevent excessive evaporation of gasoline and water. At high temperatures, the evaporation of oil and water will speed up. At this time, you need to check at any time. Once you find any abnormalities or irregularities, you must add and adjust in time.