The working principle and fermentation process of a walking stacker

 A self-propelled tipping machine is a specialized mechanical equipment used for organic waste composting treatment. Its main function is to achieve the flipping and mixing of organic waste through automation system control, promoting the composting and fermentation process. The following is the working principle of a self-propelled stacker:

Mobile performance: Self moving stackers usually have the ability to drive independently and can move freely between compost piles. This mobility allows it to cover large areas of composting sites and can handle multiple compost piles as needed.

Transmission system: The self-propelled stacker is equipped with a transmission system inside, including the engine, transmission device, etc. The engine provides power, and the transmission device transfers power to the wheels or tracks to achieve the driving and operation of the machine.

Flipping device: The self-propelled tipping machine is equipped with a tipping device, usually composed of a rotating mixer or bucket. These devices can flip and mix compost while moving, promoting the decomposition and conversion of organic matter.

Automation control system: The self-propelled stacker is equipped with an automation control system, which can achieve autonomous operation of the machine through sensors and program control. These control systems can monitor the temperature, humidity and other parameters of the compost pile, and adjust the working status of the turner according to preset conditions to achieve the best composting effect.

Safety protection system: In order to ensure operational safety, self-propelled stackers are usually equipped with safety protection systems, including emergency stop buttons, tilt sensors, etc. Once abnormal situations are detected, the machine can be stopped in a timely manner to ensure the safety of operators and equipment.

In summary, the self-propelled tipping machine achieves automatic treatment of compost piles through autonomous driving and automation control system, improves production efficiency and operational safety, and is an important equipment in organic waste treatment and organic fertilizer production.

评论

发表评论

此博客中的热门博文

Three forms of granulation for processing fertilizers in compound fertilizer production lines

图片
  In the  drum granulator , steam, ammonia gas or phosphoric acid or nitrogen solution, phosphorus ammonia slurry, and barite slurry are introduced into the drum to complete the granulation process of chemical reaction and heat supply in the cylinder; or the cold granulation process of compound fertilizer with a small amount of water is added. The materials to be granulated are rolled and rotated in the cylinder, and agglomerate into balls under certain humidity and temperature, Complete the ball making process. NPK fertilizer granulator  of compound fertilizer is produced by non drying process at room temperature, with one-time molding and output of 1-4t / h. Complete set of equipment process layout compact, scientific and reasonable, advanced technology. Energy saving and consumption reduction, no three wastes discharge, stable operation, reliable operation and convenient maintenance. It is suitable for granulation of compound fertilizer, medicine, chemical industry, feed and other r
阅读全文

Types and granulation methods of organic fertilizer production lines

图片
Organic Fertilizer Disc Granulation Production Line The particle size uniformity, sphericity and particle density prepared by disc granulator are better, but the output is not as good as that of the new type organic fertilizer granulation production line. New Type Organic Fertilizer Granulation Production Line The new type organic fertilizer granulator has high production efficiency, low cost, reliable performance and good economic benefit. Roller Press Granulation Production Line Roller press granulation production line adopts extrusion granulation technology. Powder is extruded by roll and pelletized by demoulding. Organic Fertilizer Flat Die Granulation Production Line The granular product of the flat-die granulation production line is cylindrical, which can be changed into spherical shape by the application of the circular thrower.
阅读全文

Process flow of producing NPK fertilizer using drum granulator

图片
  Raw materials for preparing granular potash fertilizer by  drum granulator Powdered potassium chloride (0-0-60) or powdered potassium sulfate (0-0-50); binder, including magnesium chloride, magnesium sulfate, magnesium oxide, bitter earth powder; filler, including clay, bentonite, gypsum, etc. Production process of potassium fertilizer granules by drum granulator 1. Water and magnesium chloride (or magnesium sulfate) are added in the reactor according to the proportion, and the solution is formed by stirring and dissolving. Then, powdered magnesium oxide is added according to a certain proportion, and further stirred evenly to form the required magnesium oxychloride hydrate (or magnesium oxysulfide hydrate). 2. The powdered potassium chloride or potassium sulfate is added into the drum  npk fertilizer granulator , and the granulation additive magnesium oxychloride hydrate (or magnesium oxysulfide hydrate) with the mass fraction of 0.5% - 10.0% on dry basis is sprayed in proportion. A
阅读全文