How to Install and Debug Chain Plate Stacker Correctly

 The depth of the chain plate tipping machine is 1.8-2 meters, and the general rake tooth tipping machine is 0.6-1.5 meters. The chain plate flipping machine occupies a small area and has higher efficiency. Advantages of chain plate flipping and throwing machine equipment: This chain type flipping and mixing machine has advantages such as high crushing efficiency, uniform mixing, thorough flipping, and long moving distance. The chain plate flipping machine and the new chain plate flipping machine have a compact structure and advanced technology. They utilize the characteristics of some beneficial microorganisms to promote the rapid decomposition of organic waste such as livestock and poultry manure. They adopt a unique pool type continuous aerobic fermentation technology to quickly decompose, remove water, sterilize, and deodorize organic waste, achieving the goal of harmless, resource utilization, and reduction treatment, with low energy consumption and stable product quality.


Installation and debugging of chain plate stacker equipment

1. After all the components of the chain plate stacker equipment are installed and assembled, we need to fix the conveyor chain plate in place to ensure that all the legs, columns, and platforms of the conveyor are fixed with chemical anchor bolts. This step is very important, and the equipment can only work safely when it is relatively stable. Therefore, we must carry out this work well.

2. After the previous step of the chain plate stacker is completed, we cannot loosen it. We also need to check all the bolts and make a thorough fixation to ensure that each screw is fixed properly. If one screw is not fixed properly, it may pose a safety hazard.

3. The axis lines of the drag axis, transmission drum, and directional drum of the chain plate stacker must be kept perpendicular to the vertical centerline of the frame, otherwise it cannot rotate flexibly. Therefore, these three items must be checked clearly, which is also a very important item.

4. The chain plate stacker needs to check the tension of the conveyor chain plate. If we want to check the tension, we need a set of data. The formation of tension should be between 1% and 1.5% of the captain, which is more suitable. We need to maintain this data well, and if it exceeds this range, we need to adjust it in a timely manner.

5. The chain plate stacker has a pull rope switch that needs to be installed on one side of the equipment. There should be a steel wire rope connecting the two switches, and the tension can be adjusted by oneself.

6. The chain plate stacker also has a switch that is a deviation switch, which can be installed on both sides of the head and tail, and is also installed in pairs. The specific position should be according to the manual.

评论

发表评论

此博客中的热门博文

Three forms of granulation for processing fertilizers in compound fertilizer production lines

图片
  In the  drum granulator , steam, ammonia gas or phosphoric acid or nitrogen solution, phosphorus ammonia slurry, and barite slurry are introduced into the drum to complete the granulation process of chemical reaction and heat supply in the cylinder; or the cold granulation process of compound fertilizer with a small amount of water is added. The materials to be granulated are rolled and rotated in the cylinder, and agglomerate into balls under certain humidity and temperature, Complete the ball making process. NPK fertilizer granulator  of compound fertilizer is produced by non drying process at room temperature, with one-time molding and output of 1-4t / h. Complete set of equipment process layout compact, scientific and reasonable, advanced technology. Energy saving and consumption reduction, no three wastes discharge, stable operation, reliable operation and convenient maintenance. It is suitable for granulation of compound fertilizer, medicine, chemical industry, fe...
阅读全文

Process flow of producing NPK fertilizer using drum granulator

图片
  Raw materials for preparing granular potash fertilizer by  drum granulator Powdered potassium chloride (0-0-60) or powdered potassium sulfate (0-0-50); binder, including magnesium chloride, magnesium sulfate, magnesium oxide, bitter earth powder; filler, including clay, bentonite, gypsum, etc. Production process of potassium fertilizer granules by drum granulator 1. Water and magnesium chloride (or magnesium sulfate) are added in the reactor according to the proportion, and the solution is formed by stirring and dissolving. Then, powdered magnesium oxide is added according to a certain proportion, and further stirred evenly to form the required magnesium oxychloride hydrate (or magnesium oxysulfide hydrate). 2. The powdered potassium chloride or potassium sulfate is added into the drum  npk fertilizer granulator , and the granulation additive magnesium oxychloride hydrate (or magnesium oxysulfide hydrate) with the mass fraction of 0.5% - 10.0% on dry basis is sprayed in...
阅读全文

How does an organic fertilizer composter produce organic fertilizer from chicken manure?

图片
  Chicken manure  organic fertilizer manufacturing process , the raw materials used include: dry chicken manure 45-50%, fermentation bacteria, cake fertilizer, mud fertilizer, sterilization and deodorant. Biological fermentation and ordinary fermentation are used to produce chicken manure bio-organic fertilizer. The product obtained by the organic fertilizer manufacturing process is a kind of chicken manure bio-organic fertilizer. After application, it can greatly increase the production of food, economy, vegetables, fruits and other crops, improve the quality of agricultural products, and improve crop properties. Environmentally safe and non-toxic, it is a new type of environmentally friendly fertilizer. The characteristics of chicken manure organic fertilizer are as follows: 1、 Chicken manure contains a lot of organic matter because of its short digestive tract. Chicken manure is used as organic fertilizer, which has good fertilizer utilization rate and high nutritional valu...
阅读全文